Shrinkflex 4:1 Dual Wall Adhesive is a adhesive-lined polyolefin heat shrink tubing is ideal for producing strong, weather tight seals on any heat shrink installation.
During the application of heat from a heat gun or other heat source, the inner adhesive wall melts and flows, creating an adhesion layer to ensure a snug fit to your harness or connector.
Adhesive lined heat shrink has Flammability Rating UL 224 and VW-1. Available in 4’ sticks.
Product Highlights
• Operating temperature from -55°C to +135ºC (-67ºF to +275ºF)
• Shrinks at 90°C (194°F)
• Melt Point (ASTM D-2117) 200°C (392°F)
• Flammability Rating UL 224, VW-1, and RoHS Compliant
• Low Temperature Flex -55°C (-67°F) (MIL-DTL-23053) No Cracking
• Dielectric Strength (volt/mil) (ASTM D-876) 500
• Volume Resistivity (ohm/cm) (ASTM D-876) 1.0 x 10¹4
• Colors Black, Clear
Product Specifications
| Size | Part Number | Unshrunk Diameter | Shrunk Diameter | Bulk Box Put Up/4' Pcs. | Shop Box Put Up/4' Pcs. | Lbs / 10 Pcs. |
|---|---|---|---|---|---|---|
| 3/16" | H4A0.19 | 4.0mm | 1.0mm | 250 | 25 | 0.30 |
|
5/16" |
H4A0.31 |
8.0mm |
2.0mm |
250 |
25 |
0.44 |
| 1/2" | H4A0.50 | 12.0mm | 3.0mm | 200 | 25 | 0.90 |
| 3/4" | H4A0.75 | 16.0mm | 4.0mm | 80 | 25 | 1.50 |
| 1" | H4A1.00 | 24.0mm | 6.0mm | 50 | 25 | 2.60 |
|
1 1/4" |
H4A1.25 |
32.0mm |
8.0mm |
25 |
5 |
3.50 |
|
2" |
H4A2.00 |
52.0mm |
13.0mm |
15 |
5 |
8.00 |
- Short Product Description:
- 4:1 Dual Wall Adhesive Lined Polyolefin Heatshrink Tubing
