Shrinkflex 3:1 Dual Wall Adhesive is a adhesive-lined polyolefin heat shrink tubing is ideal for producing strong, weather tight seals on any heat shrink installation.
During the application of heat from a heat gun or other heat source, the inner adhesive wall melts and flows, creating an adhesion layer to ensure a snug fit to your harness or connector.
Adhesive lined heat shrink has Flammability Rating UL 224 and VW-1. Available in 4’ sticks.
Product Highlights
• Operating temperature from -55°C to +135ºC (-67ºF to +275ºF)
• Shrinks at 90°C (194°F)
• Melt Point (ASTM D-2117) 200°C (392°F)
• Flammability Rating UL 224, VW-1, and RoHS Compliant
• Low Temperature Flex -55°C (-67°F) (MIL-DTL-23053) No Cracking
• Dielectric Strength (volt/mil) (ASTM D-876) 500
• Volume Resistivity (ohm/cm) (ASTM D-876) 1.0 x 10¹4
• Colors Black, White, Red, Clear and Blue
Product Specifications
| Size | Part Number | Unshrunk Diameter | Shrunk Diameter | Bulk Box Put Up/4' Pcs. | Shop Box Put Up/4' Pcs. | Lbs / 10 Pcs. |
|---|---|---|---|---|---|---|
| 1/8" | H3A0.13 | 3.0mm | 1.0mm | 250 | 25 | 0.26 |
|
3/16" 1/4" |
H3A0.19 H3A0.25 |
4.8mm 6.0mm |
1.5mm 2.0mm |
250 250 |
25 25 |
0.31 0.35 |
| 3/8" | H3A0.38 | 9.0mm | 3.0mm | 250 | 25 | 0.55 |
| 1/2" | H3A0.50 | 12.0mm | 4.0mm | 200 | 25 | 0.75 |
| 3/4" | H3A0.75 | 19.0mm | 6.0mm | 80 | 25 | 1.65 |
| 1" | H3A1.00 | 24.0mm | 8.0mm | 50 | 25 | 2.15 |
|
1 1/2" |
H3A1.50 |
38.0mm |
13.0mm |
25 |
5 |
4.40 |
|
2" |
H3A2.00 |
50.0mm |
17.0mm |
15 |
5 |
5.25 |
- Short Product Description:
- 3:1 Dual Wall Adhesive Lined Polyolefin Heatshrink Tubing
