Shrinkflex 2:1 Dual Wall Adhesive is a adhesive-lined polyolefin heat shrink tubing is ideal for producing strong, weather tight seals on any heat shrink installation.
During the application of heat from a heat gun or other heat source, the inner adhesive wall melts and flows, creating an adhesion layer to ensure a snug fit to your harness or connector.
Adhesive lined heat shrink comes in 2:1, 3:1, 4:1, and 6:1 shrink ratio, and it is available in 4’ sticks.
Product Highlights
• Operating temperature from -55°C to +135ºC (-67ºF to +275ºF)
• Shrinks at 90°C (194°F)
• Melt Point (ASTM D-2117) 200°C (392°F)
• Flammability Rating UL 224, VW-1, and RoHS Compliant
• Low Temperature Flex -55°C (-67°F) (MIL-DTL-23053) No Cracking
• Dielectric Strength (volt/mil) (ASTM D-876) 500
• Volume Resistivity (ohm/cm) (ASTM D-876) 1.0 x 10¹4
• Colors Black, White, Red, Clear and Yellow
Product Specifications
| Size | Part Number | Unshrunk Diameter | Shrunk Diameter | Bulk Box Put Up/4' Pcs. | Shop Box Put Up/4' Pcs. | Lbs / 10 Pcs. |
|---|---|---|---|---|---|---|
| 1/8" | H2A0.13 | 3.2mm | 1.6mm | 250 | 25 | 0.170 |
| 1/4" | H2A0.25 | 6.4mm | 3.2mm | 250 | 25 | 0.320 |
| 3/8" | H2A0.38 | 9.6mm | 4.8mm | 250 | 25 | 0.530 |
| 1/2" | H2A0.50 | 12.7mm | 6.4mm | 200 | 25 | 0.650 |
| 3/4" | H2A0.75 | 19.1mm | 9.6mm | 80 | 25 | 1.590 |
| 1" | H2A1.00 | 25.4mm | 12.7mm | 50 | 25 | 1.630 |
| 1 1/2" | H2A1.50 | 38.1mm | 19.1mm | 15 | 5 | 2.500 |
- Short Product Description:
- Dual Wall Adhesive Lined Polyolefin Heatshrink Tubing
